IEC 60332-1-1-2004 着火条件下电缆和光缆的试验.第1-1部分:单根绝缘电线或电缆垂直火焰蔓延的试验.装置

作者:标准资料网时间:2024-05-21 22:53:24 浏览:9001 来源:标准资料网

【英文标准名称】:Testsonelectricandopticalfibrecablesunderfireconditions-Part1-1:Testforverticalflamepropagationforasingleinsulatedwireorcable-Apparatus
【原文标准名称】:着火条件下电缆和光缆的试验.第1-1部分:单根绝缘电线或电缆垂直火焰蔓延的试验.装置
【标准号】:IEC60332-1-1-2004
【标准状态】:现行
【国别】:国际
【发布日期】:2004-07
【实施或试行日期】:
【发布单位】:国际电工委员会(IX-IEC)
【起草单位】:IEC/TC20
【标准类型】:()
【标准水平】:()
【中文主题词】:绝缘线;导电体;试验;易燃性;耐火性;电缆;电缆;燃烧特性;阻燃性;定义;绝缘电缆;电线;纤维;尺寸;垂直;电气工程;电力电缆;试验设备;火源;光波导;单芯电缆;火焰传播;封闭式试验室
【英文主题词】:Burningbehaviours;Cables;Closedtestrooms;Definitions;Dimensions;Electriccables;Electricconductors;Electricalcords;Electricalengineering;Fibres;Fireresistance;Flamepropagation;Flameresistance;Flammability;Ignitingsources;Insulatedcables;Insulatedcords;Insulatedwires;Opticalwaveguides;Powercables;Single-corecables;Testequipment;Testing;Vertical
【摘要】:GB/T18380的本部分规定了在火焰条件下,单根电线电缆或光缆火焰垂直蔓延试验的试验装置。试验方法及推荐性能要求的资料性附录见GB/T18380.12-2008。
【中国标准分类号】:K13
【国际标准分类号】:13_220_40;29_060_20;33_180_10
【页数】:6P.;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: IEC 60099-4-2004 避雷器.第4部分:交流电系统用无间隙金属氧化物避雷器
下一篇: IEC 60247-2004 液体绝缘材料.相对电容率、电介质损耗因数(tan)和直流电阻率的测量

Product Code:SAE ARP1675
Title:Structural Weldbonding of Aluminum Structures
Issuing Committee:Ams P17 Composite Materials Committee
Scope: This SAE Aerospace Recommended Practice describes the aluminum weldbonding process for fabrication of secondary aircraft structural assemblies possessing excellent strength, fatigue life, and environmental durability. The nature of the weld nugget, produced by resistance weldbonding, provides microcrack initiators and propagators which compromise the fatigue life. Additional development work is required to validate this process for each primary aircraft structure. This manufacturing process has been developed and validated for high strength bare aluminum alloys AMS-4037 and AMS-4045 within the thickness gages of 0.020 to 0.125 in (0.51 to 3.48 mm). It is expected to be applicable to other bare aluminum alloys and tempers. The use of this process is not recommended for clad or mixed bare-clad alloy systems because of decreased environmental durability. The surface preparation system has been validated for use with 80 degrees C (176 degrees F) service temperature modified epoxy paste adhesive which cures at 120 to 125 degrees C (248 to 257 degrees F). The adhesive contains a radio-opaque substance, strontium chromate, which permits nondestructure examination for bondline voids by X-radiography.e surface preparation system has been validated for use with 80 degrees C (176 degrees F) service temperature modified epoxy paste adhesive which cures at 120 to 125 degrees C (248 to 257 degrees F). The adhesive contains a radio-opaque substance, strontium chromate, which permits nondestructure examination for bondline voids by X-radiography.【英文标准名称】:(Erratum1)
【原文标准名称】:勘误表1
【标准号】:JISF0407ERRATUM1-2003
【标准状态】:现行
【国别】:日本
【发布日期】:
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:U44
【国际标准分类号】:
【页数】:1P;A4
【正文语种】:日语